Step 1: Download the Ring App
To download the Ring App:
- - On your mobile device, go to the App Store.
- - Do a search for “Ring.”
- - Download and install the Ring app on your mobile device.
Step 2: Create or Login to Your Account
If this is your first Ring product, You will be asked to set up an account.
To set up an account:
- - Open the Ring App
- - Select Set Up a Device.
- - Follow the in-app instructions to create a new account.
- - If you already have another Ring product installed, simply open the app and select “Setup Device.”
Step 3: Tap "Setup Device"
- - Tap “Setup Device”
- - Select Ring Video Doorbell Pro.
Step 4: Name Your Device
After beginning the setup process you will have the opportunity to name your Ring Video Doorbell Pro to distinguish it from the other Ring products in your account. Several default names are suggested or you can enter a custom name for your Video Doorbell Pro.
Step 5: Select Your Doorbell Type
After naming your Ring Video Doorbell Pro, you may be prompted to select a doorbell type. If you do not receive this prompt, skip to step six. Otherwise, select the type of internal doorbell your Ring Video Doorbell Pro will be connected to. Choose Mechanical if your bell uses a mechanical striker and makes a traditional "ding dong" sound. Choose Digital if your bell plays its sound through a speaker. Finally if your Ring Doorbell Pro isn't connected to a bell, select "None."
Step 6: Specify Your Location
In the next step, if this is your first time setting up a Ring product, you will get a request from your phone informing you that the Ring App wishes to use your phone’s location services to pinpoint your location. Allowing the app to do so will assist in inputting your address. Without a specific location, certain features of your Video Doorbell will not work properly.
Note: The app will estimate your address as closely as possible. If it is not completely accurate and misses the address by a few numbers, the app will still work properly.
Step 7: Put your Ring Doorbell into Setup Mode
If you've never set up your Ring Doorbell Pro before, it will automatically enter Setup mode and stay there for 10 minutes. Otherwise, push the black button on the right hand side of your Ring Doorbell Pro to put the device in Setup mode. When the light on the front of your Ring Doorbell Pro is spinning, tap the Continue button in your app.
Step 8: Wi-fi Setup
For the next step, your phone or tablet will need to connect to the Wi-Fi network called “Ring Setup.” If you’re on an Android device, this step should happen automatically.
On an iPhone or iPad, follow the instructions below:
- - Press the Home button on your iPhone or iPad to leave the Ring app.
- - Navigate to the “Settings” app.
- - Tap “Wi-Fi.”
- - Select the network from the list that begins with “Ring-.”
- - Close your Settings App and return to the Ring App.
- - When you return to the Ring app, the app will automatically scan for available - Wi-Fi networks. Select the network closest to your Ring Doorbell to connect it.
Step 9: Connect Your Ring Doorbell Pro to Your Wi-Fi
The next step in the setup process will ask you to connect your Ring Doorbell Pro to your Wi-Fi network. Be sure you're near your router and have your Wi-Fi password ready. If you have more than one Wi-Fi network, select the one closest to where you will be installing your Ring Doorbell.
Note: Following this step, your Ring Doorbell Pro may update its internal software. While performing an update, the light will flash. Note that while the update is taking place, and the light is flashing, your Video Doorbell will not work. Wait until it completes and your light is glowing steadily before proceeding to the next step.
Step 10: Run a Test Through Your Ring Doorbell Pro
Once your Ring Doorbell Pro has completed its update and setup, push the front button to run a test call.